The Valmet 8100 tractor is powered by a SisuDiesel 6.6L 6-cyl diesel engine that provides 118hp / 88.0kW of horsepower and 335.6lb-ft / 455.1Nm torque. It has a 4x4 MFWD 4WD drive configuration and a 24-speed two-speed power shift 36-speed three-speed power shift transmission.

Engine

The engine is not specified in the data provided. However, based on the model, the Valmet 8100 is known to have a 6-cylinder liquid-cooled diesel engine with a power output of 118hp / 88.0kW. It has a displacement of 402.6ci / 6.6L, a compression ratio of 16.5:1, and a torque of 335.6lb-ft / 455.1Nm at 1550rpm. The engine is started using an electric starter with a voltage of 12V.


Searching for Valmet 8100 Parts? Discover Suppliers and Request Samples Now!

Find Suppliers & Request Samples

Transmission

The transmission of the Valmet 8100 is a 24-speed two-speed power shift or a 36-speed three-speed power shift. The engine power output is 118hp / 88.0kW. The transmission is designed to provide smooth and efficient power transfer to the wheels. It has a high and low range, which allows the operator to select the appropriate gear for the task at hand. The transmission is also equipped with a power shuttle, which allows the operator to change the direction of travel without using the clutch.

Brakes

The brakes of the Valmet 8100 are hydraulic wet disc brakes. They are designed to provide reliable and consistent stopping power, even in wet or muddy conditions. The brakes are easy to maintain and are designed to last for a long time. The Valmet 8100 is also equipped with a parking brake, which is engaged by pulling a lever located on the right side of the operator's seat. The parking brake is designed to hold the tractor in place when it is parked.



Steering

The steering of the Valmet 8100 is power steering. It is designed to provide easy and precise control of the tractor, even when it is loaded or pulling heavy equipment. The steering system is also designed to be durable and reliable, with minimal maintenance required. The Valmet 8100 is equipped with a fuel tank with a capacity of 43.6gal / 165.0L, which provides enough fuel for long hours of operation.


Searching for Valmet 8100 Parts? Discover Suppliers and Request Samples Now!

Find Suppliers & Request Samples

Common Problems

Users of the Valmet 8100 have reported some common problems with the tractor. One of the most common issues is with the transmission, which can sometimes fail to engage or shift properly. Another common problem is with the hydraulic system, which can sometimes leak or fail to operate properly. Some users have also reported issues with the brakes, which can sometimes wear out quickly or fail to provide enough stopping power. Additionally, some users have reported issues with the cab, which can sometimes be uncomfortable or noisy during operation. Finally, some users have reported issues with the engine, which can sometimes fail to start or run rough.

What Users Like

Users of the Valmet 8100 appreciate the tractor's powerful engine, which provides plenty of power for a wide range of tasks. They also like the smooth and efficient transmission, which allows for easy and precise control of the tractor. Additionally, users appreciate the reliable and consistent braking performance of the hydraulic wet disc brakes. They also like the comfortable and easy-to-use cab, which provides a comfortable and quiet environment for long hours of operation. Finally, users appreciate the durable and reliable construction of the Valmet 8100, which is designed to provide years of trouble-free operation.

Valmet 8100 Technical Specifications

Power

Engine118hp / 88.0kW

Engine Detail

DescriptionSisuDiesel 620D diesel 6-cylinder liquid-cooled
Displacement402.6ci / 6.6L
Bore/stroke4.25x4.72inches / 108x 120mm
Power118hp / 88.0kW
Compression16.5:1
Rated Rpm2225
Torque335.6lb-ft / 455.1Nm
Torque Rpm1550
Starterelectric
Starter Volts12

Engine

DescriptionSisuDiesel 6.6L 6-cyl diesel
Fuel Tank43.6gal / 165.0L

Mechanical

Chassis4x4 MFWD 4WD
Steeringpower
Brakeshydraulic wet disc
CabCab standard with available air-conditioning
Transmissions24-speed two-speed power shift 36-speed three-speed power shift

Tires

Ag Front14.9R28
Ag Rear18.4R38

Dimensions

Wheelbase100.8inches / 256cm
Length187inches / 474cm
Height (rops)113inches / 287cm
Height (cab)108.3inches / 275cm
Weight10318lbs / 4680kg
Clearance (front Axle)20.1inches / 51cm
Clearance (rear Axle)19.1inches / 48cm

Dimensions And Tires

Wheelbase100.8inches / 256cm
Weight10318lbs / 4680kg
Front Tire14.9R28
Rear Tire18.4R38

Hydraulics

Pump Flow18.5gpm / 70.0lpm

Tractor Hitch

Rear Lift12125lbs / 5499kg

Electrical

Groundnegative
Charging Systemalternator
Battery Volts12
Battery Ah150

Power Take Off Pto

Rear Ptoindependent
Rear Rpm540/1000
Engine Rpm540@1874 / 1000@2080

Searching for Valmet 8100 Parts? Discover Suppliers and Request Samples Now!

Find Suppliers & Request Samples

Other Valmet tractors:

Valmet 1100, Valmet 1203, Valmet 15, Valmet 1502, Valmet 20, Valmet 2005, Valmet 205, Valmet 2105, Valmet 255, Valmet 305, Valmet 355, Valmet 365, Valmet 405, Valmet 465, Valmet 500, Valmet 504, Valmet 505, Valmet 555, Valmet 565, Valmet 600, Valmet 6000, Valmet 602 Turbo, Valmet 604, Valmet 604T, Valmet 605, Valmet 6100, Valmet 6200, Valmet 6250, Valmet 6300, Valmet 6350, Valmet 6400, Valmet 655, Valmet 6550, Valmet 6600, Valmet 665, Valmet 6650, Valmet 6750, Valmet 68, Valmet 6800, Valmet 6850, Valmet 6900, Valmet 700, Valmet 702S, Valmet 705, Valmet 755, Valmet 78, Valmet 800, Valmet 8000, Valmet 805, Valmet 8050, Valmet 8100, Valmet 8200, Valmet 8300, Valmet 8350, Valmet 8400, Valmet 8450, Valmet 855, Valmet 8600, Valmet 864, Valmet 865, Valmet 8750, Valmet 8800, Valmet 885, Valmet 8850, Valmet 8950, Valmet 900, Valmet 905, Valmet 985, Valmet 985 4x4,