Farmall Cub N/A Specifications
Engine
The engine is an International Harvester C60 gasoline 4-cylinder liquid-cooled with a displacement of 59.5ci / 1.0L. It has a bore/stroke of 2.625x2.75inches / 67x 70mm and a compression ratio of 6.5:1. The engine is rated at 1600/1800 (later) RPM and has a firing order of 1-3-4-2. It can be started manually or electrically (optional) with a starter voltage of 6/12 (After SN# 224401). The coolant capacity is 9.75qts / 9.2L and it uses Champion D-21/AC C86 spark plugs with a gap of 0.023inches / 0.584mm. The intake and exhaust valve clearances are 0.013inches (cold) / 0.330mm.
Searching for Farmall Cub Parts? Discover Suppliers and Request Samples Now!
Find Suppliers & Request SamplesTransmission
The transmission is a 3-speed sliding gear type. Unfortunately, no further details were provided in the .
Brakes
The brakes are differential contracting band brakes and are located on the two-wheel drive. The tractor has an open operator station and the steering is manual. The engine is equipped with a thermosyphon cooling system and an oil bath air cleaner.
Steering
The steering is manual and uses an International Harvester 1.0L 4-cylinder gasoline engine. Unfortunately, no further details were provided in the .
Searching for Farmall Cub Parts? Discover Suppliers and Request Samples Now!
Find Suppliers & Request SamplesCommon Problems
Users have reported issues with the starter motor failing and the engine overheating. The differential contracting band brakes have also been known to wear out quickly and require frequent adjustment. Additionally, the lack of power steering can make it difficult to maneuver the tractor in tight spaces.
What Users Like
Users appreciate the compact size of the Farmall Cub, making it easy to store and transport. The tractor is also known for its reliability and durability, with many users reporting that it has lasted for decades with proper maintenance. The agricultural and industrial rear tires provide good traction on a variety of surfaces.
Techincal Specifications
Engine Detail | |
| Description | International Harvester C60 gasoline 4-cylinder liquid-cooled |
| Displacemen | 59.5ci / 1.0L |
| Bore/strok | 2.625x2.75inches / 67x 70mm |
| Cooling Syste | thermosyphon |
| Air Cleane | oil bath |
| Compressio | 6.5:1 |
| Rated Rp | 1600/1800 (later) |
| Firing Orde | 1-3-4-2 |
| Starte | manual/electric OptOptional |
| Starter Volt | 6/12 (After SN# 224401) |
| Coolant Capacit | 9.75qts / 9.2L |
| Sparkplu | Champion D-21/AC C86 |
| Sparkplug Ga | 0.023inches / 0.584mm |
| Intake Valve Clearanc | 0.013inches (cold) / 0.330mm |
| Exhaust Valve Clearanc | 0.013inches (cold) / 0.330mm |
Engine | |
| Description | International Harvester 1.0L 4-cyl gasoline |
Transmission | |
| Description | 3-speed sliding gear |
Mechanical | |
| Description | Two-wheel drive Differential contracting band brakes Open operator station |
| Steerin | manual |
Tires | |
| Ag Fron | 4.00-12 |
| Ag Rea | 9.5-24 |
| Industrial Rea | 8.3-24/9.5-24 |
Dimensions And Tires | |
| Wheelbas | 69.25inches / 175cm |
| Weigh | 1477 to 1877 pounds |
| Front Tir | 4.00-12 |
| Rear Tir | 8-24 |
Serial Numbers | |
| 194 | 57381 |
| 195 | 211441 |
| 196 | 223453 |
| Fina | 224703 |
Capacity | |
| Fue | 7.5gal / 28.4L |
| Hydraulic Syste | 0.56gal / 2.1L |
Hydraulics | |
| Capacit | 0.56gal / 2.1L |
| Pressur | 1200psi / 82.7bar |
| Total Flo | 2.8gpm / 10.6lpm |
Tractor Hitch | |
| Typ | IH Fast Hitch OptOptional |
Electrical | |
| Groun | positive/negative (After SN# 224401) |
| Charging Syste | generator |
| Battery Volt | 6/12 (sn 224401) |
Power Take Off Pto | |
| Rear Pt | independent |
| Rear Rp | 1600, 1800 (counter-clockwise) |
Engine Oil | |
| Oil Capacit | 3qts / 2.8L |
| Oil Chang | 120 h |
Serial Location | |
| Description | Serial number plate on the right side of the Farmall Cub, above the front axle |